A driving force was the fact that I receive many emails, with questions about looming. My decision to purchase this loom was one I thought about for sometime, as the cost is quite high. I may purchase this later, but will wait and see how it works without this extender, first. This would increase the 'height' of the loom. One other accessory that may have interested me, but I did not purchase at this time, is the 'extender' bar set. But it only states that this additional bar increases the space another inch or so. An additional bar and clamps are being sold, as an accessory, so you can clamp this in place which will 'widen' that space between the warps, when warped. I mentioned above how close the front warps and back warps are wrapped, around this loom, with a small space in between. Because I prefer the spring, top and bottom of my warps, I also purchased an additional spring. After looming some rows of beads, using just the one spring, the beads will keep the rows of warps separate. Otherwise, you just wrap your warps around a bar. If you prefer to use a loom with a spring bar across the bottom of the loom, then this too is an additional purchase. Therefore, the height of one of their looms, really wouldn't be an issue to consider, if purchasing one.Īll of the looms include a top 'spring' for separating the warps. The warp bars are also able to be moved, sometime during the beading process, so you can 'slip your work around' offering more room to continue bead looming. Then, you can warp your loom using these two warp bars, not having to make a complete pass around the back. This is allowed to be clamped on the lower portion of the loom, with the original warp bar clamped on the upper portion of the loom. One of the accessories, offered for an additional purchase price, is another 'warp bar'. Not only could this be uncomfortable, until you can devise a way to make it comfortable, but you are threading this loom with double, maybe triple the amount of warp strings you will ever need! Such a large waste of thread. To begin looming, you will need to 'slip your hand' in between these warps to handle your beading. What you find, after warping the way we are instructed, is a 'double wrap' of warp thread, appx. The thread is continued in this same three step pattern, until the entire loom is warped the proper number of warps you'll be using to loom. This same thread is to be wrapped up around the top bar, in between a groove of a spring, brought down the front, wrapped around the bottom bar, (no spring attached) and double looped around the original warp bar (where the knot was first tied). The one warp bar, that arrives with the loom, is movable and is the point where your first warp thread is tied. Once you include the accessories, desired to make this a great bead loom, your cost can be overwhelming for a loom this size. The base price of the loom is so much more then other wonderfully crafted looms on the market. Speaking of accessories, this is what really shot the total cost up.the accessories.
The frame is adjustable, if you purchase additional accessories.
Since they have the warps, of course it can also accommodate beads! Again, not knowing much about textile looming, I can only guess at this conclusion.įrom the description, it seems to be welded and fabricated sturdily out of metal. I feel these looms were originally created for 'textile looming'. What I found is that these looms arrive with nothing more then the frame, stand, one spring on top, a warp bar and a shuttle.
I decided on the 16 inch wide version, reading everything I could, about this loom, before I made my choice.
Yesterday, I purchased my first Mirrix Loom. Remember, 'keeping the tension' is the best way to describe what makes a loom 'good'. Of course, as with any tools or supplies, we all have our preferences. I will include my take on each type of loom, in my book. I have been interested in many looms, and own so many different types and sizes.
0 kommentar(er)
